A breakthrough in spark plug technology. View larger.

DiamondFire electrode design increases cylinder combustion. View larger.

More power and better fuel efficiency, with fewer emissions. View larger.

DiamondFire Technology
For the last 100 years, the only real advance in consumer spark plug technology has been to develop ways to make them cheaper. E3 Spark Plug's DiamondFire technology changes all of that through an improved electrode design that provides for more efficient burning of your vehicle's air/fuel vapor, leading to more pressure in the cylinder. These improvements are measurable, confirmed and based on the following design elements found in existing performance spark plugs.

First, the DiamondFire electrode directs the flame kernel to the piston more directly, reducing the travel time from the spark zone to the end gases via the open section at the top of the electrode. Given the short time available to get combustion started, the faster you can get the flame to the piston, the better. Second, the physical features of the electrode project further forward into the combustion chamber. This brings the spark zone closer to areas of probable "good" air/fuel mixture and also creates beneficial "micro-aerodynamics" within the spark zone. The initial combustion wave leaves the spark area at supersonic speeds above Mach 1, and the elevated edge provides a kind of chimney effect so the next round of air/fuel mixture gets into the spark zone more easily. Finally, the E3 electrode design features forced edge-to-edge spark discharge, which is the best way to get a spark to leave a surface. This improves upon the phenomena that drove race car drivers to "cut back" ordinary electrode spark plugs in order to improve the spark discharge. The spark itself occurs only when an avalanche of electrons migrates from the two electrodes (anode to cathode). Sharp edges are better at initiating electron migrations, and these accelerated electrons collide with matter inside the spark zone to release additional electrons. This design ensures that the whole population of electrons works to create a plasma channel through which the spark current flows more easily, resulting in an increase in both power output and fuel economy, while reducing emissions in gasoline engines and the build up of carbon deposits on engine surfaces.

Key Features:

• DiamondFire electrode technology that creates a superior spark and resulting flame front extending further into the cylinder, producing more localized pressure.
• Power increased > 6% to 12% (depending on engine class).
• Fuel efficiency improved > 4% to 13% (depending on engine class).
• Emissions reduced in 2 and 4-stroke engines (after 50 hours).
  • 58% CO emissions reduction.
  • 42% hydrocarbon reduction.
• Near elimination of performance inhibiting carbon deposits.
• Dramatically longer plug life.
• 5-year/100,000 mile limited warranty.

5-Year or 100,000 Mile Limited Warranty
E3 Automotive spark plugs used for personal, family or household purposes are warranted by the manufacturer to provide an experience of more power on less fuel, quicker starts and less fouling than competitive standard spark plugs, and to be free of defects in material or workmanship, for five years or 100,000 miles from the date of purchase. In the event of provable defect within the stated warranty period, the manufacturer will either replace the item(s), or refund the purchase price at their discretion.

About Pyrotek E3
Headquartered in Point Vedra, Florida, Pyrotek E3, d.b.a. E3 Spark Plugs, was formed to help customers increase power, improve fuel efficiency, and reduce engine emissions that contribute to global warming. Their advanced DiamondFire electrode design burns fuel more efficiently and completely, increasing mileage, horsepower and drastically cutting toxic emissions.